Experimental Physics and
Industrial Control System

I get the following when I load my IOC and am sending this because the message tells me to do that.  Here is the message:
------------------------------
CAS-client: A call to "assert ((epicsMutexLock(((precord)->mlok))==epicsMutexLockOK))" failed in ../dbEvent.c at 441
Current time THU MAY 01 2008 16:43:58.795816100.
EPICS Release EPICS R3.14.9-ilc1 $R3-14-9$ $2007/02/05 16:31:45$.
Please E-mail this message and the output from "tt (0x2622570)"
to the author or to [email protected]
Thread CAS-client (0x2622570) suspended
tt (0x2622570)
0x02db54c8 epicsThreadSuspendSelf+0x3c : 0x00279230 ()
value = 0 = 0x0
esart2>
------------------------------
Thanks,

Zen

Navigate by Date:

Prev: RE: asyn/stream reconnect problems Mark Rivers

Next: RE: camonitor prints CA errors to stdout rather than stderr Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Using EPICS in new radio telescope interferometer project Juan Carlos Guzman

Next: RE: camonitor prints CA errors to stdout rather than stderr Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024