You should be able to do this by making the genSub input link a
channel access link (assuming that the genSub SCAN field is Passive):
field(INPA, "foobar.VAL CP")
On Apr 3, 2008, at 5:31 PM, Emmanuel Mayssat wrote:
Hello,
Is there a way to detect a monitor event in a genSub routine?
I believe it is possible in the sequencer with the evflag entries.
But I am interested in doing that with a genSub record this time.
If gensub cannot do it, is it possible to detect a monitor event with
any other means than through the sequencer ?
--
Emmanuel
--
Eric Norum <[email protected]>
Advanced Photon Source
Argonne National Laboratory
(630) 252-4793
- Replies:
- Re: genSub and capture monitor event Emmanuel Mayssat
- References:
- genSub and capture monitor event Emmanuel Mayssat
- Navigate by Date:
- Prev:
RE: Building motor6-3 record Mark Rivers
- Next:
Re: genSub and capture monitor event Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
genSub and capture monitor event Emmanuel Mayssat
- Next:
Re: genSub and capture monitor event Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|