Experimental Physics and
| |||||||||||||||
|
On the night of 30th December 2007, a fire broke out in one of our control system's VME crates. Considerable damage was inflicted on the crate, but fortunately the fire did not spread. On examination of the crate and VME cards, the P1 connector, to which a "MAXv 8000" card was connected, had been destroyed by heat/flame. Electrical burning of some components was evident on the MAXv card, these components were well away from the direct heat of the main area of combustion (components close to the fire were of course destroyed). We are presently trying to ascertain which component caused the failure (the MAXv card, P1 connector or VME backplane). Has anyone else experienced this type of event, in particular with the MAXv motor control card? Ian Gillingham
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
| ||||||||||||||
ANJ, 02 Sep 2010 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing · |