Hi Emmanuel ,
There is code for the marccd in the ccd module:
http://cars.uchicago.edu/software/epics/ccd.html
It consists of a database and an SNL program that communicates with the marccd server code via TCP/IP sockets and asyn.
It currently only supports mode 0, not mode 1. Mode 1 can improve performance for the multichip (MX) detectors, and should be implemented in the future, but it does not improve perfomance on the single element marccd.
I think that GMCA CAT at the APS has implemented mode 1, so if you need it you might get the code from them.
Mark
________________________________
From: [email protected] on behalf of Emmanuel Mayssat
Sent: Wed 12/19/2007 8:01 PM
To: epics
Subject: mar cdd driver, anybody ?
Hello there,
Does anybody have a driver for the marccd ?
I believe one exist for remote mode 0.
Is there one for remote mode 1 ?
Regards,
--
Emmanuel Mayssat <[email protected]>
- References:
- mar cdd driver, anybody ? Emmanuel Mayssat
- Navigate by Date:
- Prev:
mar cdd driver, anybody ? Emmanuel Mayssat
- Next:
EpicsToLabView.so Eric Berryman
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
mar cdd driver, anybody ? Emmanuel Mayssat
- Next:
EpicsToLabView.so Eric Berryman
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|