Experimental Physics and
Industrial Control System

Dear Administrator:

  I met the following problem when I executing the st.cmd of autosave.

 

Press any key to stop auto-boot...

 7  6  5 @

 

boot device          : gei

unit number          : 0

processor number     : 0

host name            : lk

file name            : /home/lk/Tornado2.2/target/config/mv5500/vxWorks

inet on ethernet (e) : 192.168.8.110:ffffff00

inet on backplane (b): 0

host inet (h)        : 192.168.8.6

gateway inet (g)     : 192.168.8.1

user (u)             : lk

ftp password (pw)    : dianzikun

flags (f)            : 0x0

startup script (s)   : /home/lk/epics/modules/autosave_R4-2/iocBoot/iocas/st.cmd

 

Attached TCP/IP interface to gei0.

Attaching network interface lo0... done.

Loading... 1212640

Starting at 0x100000...

 

Target Name: vxTarget

Attached TCP/IP interface to gei unit 0

Attaching network interface lo0... done.

Unable to add route to 192.168.8.0; errno = 0xffffffff.

Loading symbol table from lk:/home/lk/Tornado2.2/target/config/mv5500/vxWorks.sym ...done

 

 

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)

 ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]           

 ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]           

 ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]

 ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]] 

 ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]

 ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]

 ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]

 ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.1

 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6

 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2003

 

                               CPU: Motorola MVME5500-0163 - MPC 7457.  Processor #0.

                              Memory Size: 0x20000000.  BSP version 1.2/1.

                             WDB Comm Type: WDB_COMM_END

                            WDB: Ready.

 

Executing startup script /home/lk/epics/modules/autosave_R4-2/iocBoot/iocas/st.cmd ...

# vxWorks startup script

 

#< ../nfsCommands

#< cdCommands

 

################################################################################

#cd topbin

cd "/home/lk/epics/modules/autosave_R4-2/bin/vxWorks-ppc604_long"

value = 0 = 0x0

 

# If the VxWorks kernel was built using the project facility, the following must

# be added before any C++ code is loaded (see SPR #28980).

sysCplusEnable=1

sysCplusEnable = 0x215490: value = 1 = 0x1

 

### Load custom EPICS software from user tree and from share

ld < asApp.munch

sysAtReboot not found. epicsExit will not be called by reboot.

value = 519045840 = 0x1ef002d0

 

#cd startup

 

cd "/home/lk/epics/modules/autosave_R4-2/iocBoot/iocas"

value = 0 = 0x0

################################################################################

# Tell EPICS all about the record types, device-support modules, drivers,

# etc. in the software we just loaded (as.munch)

dbLoadDatabase("../../dbd/as.dbd")

undefined symbol: dbLoadDatabase

 

Done executing startup script /home/lk/epics/modules/autosave_R4-2/iocBoot/iocas/st.cmd

->

When I combined motorR6-2-2 and autosave, it ended like this:

 

[VxWorks Boot]: @

 

boot device          : gei

unit number          : 0

processor number     : 0

host name            : lk

file name            : /home/lk/Tornado2.2/target/config/mv5500/vxWorks

inet on ethernet (e) : 192.168.8.110:ffffff00

inet on backplane (b): 0

host inet (h)        : 192.168.8.6

gateway inet (g)     : 192.168.8.1

user (u)             : lk

ftp password (pw)    : dianzikun

flags (f)            : 0x0

startup script (s)   : /home/lk/epics/modules/motorR6-2-2/iocBoot/iocNoMPF/st.cmd.motor_as.Vx

 

Attached TCP/IP interface to gei0.

Attaching network interface lo0... done.

Loading... 1212640

Starting at 0x100000...

 

Target Name: vxTarget

Attached TCP/IP interface to gei unit 0

Attaching network interface lo0... done.

Unable to add route to 192.168.8.0; errno = 0xffffffff.

Loading symbol table from lk:/home/lk/Tornado2.2/target/config/mv5500/vxWorks.sym ...done

 

 

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)

 ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]           

 ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]           

 ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]

 ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]] 

 ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]

 ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]

 ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]

 ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]

 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.1

 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6

 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2003

 

                               CPU: Motorola MVME5500-0163 - MPC 7457.  Processor #0.

                              Memory Size: 0x20000000.  BSP version 1.2/1.

                             WDB Comm Type: WDB_COMM_END

                            WDB: Ready.

 

Executing startup script /home/lk/epics/modules/motorR6-2-2/iocBoot/iocNoMPF/st.cmd.motor_as.Vx ...

##########  motor   ##########

 

cd "/home/lk/epics/modules/motorR6-2-2/bin/vxWorks-ppc604_long"

value = 0 = 0x0

sysCplusEnable=1

sysCplusEnable = 0x215490: value = 1 = 0x1

ld < NoMPFVx.munch

sysAtReboot not found. epicsExit will not be called by reboot.

value = 519034416 = 0x1eefd630

 

cd "/home/lk/epics/modules/autosave/4-2-1/bin/vxWorks-ppc604_long"

value = 0 = 0x0

ld < asApp.munch

sysAtReboot not found. epicsExit will not be called by reboot.

value = 518336960 = 0x1ee531c0

 

cd "/home/lk/epics/modules/autosave/4-2-1/"

value = 0 = 0x0

dbLoadDatabase("dbd/as.dbd")

Unable to install device routing the vxWorks logging system to the EPICS logging system because "errno = 0xd0006"

value = 0 = 0x0

as_registerRecordDeviceDriver(pdbbase)

undefined symbol: as_registerRecordDeviceDriver

 

Done executing startup script /home/lk/epics/modules/motorR6-2-2/iocBoot/iocNoMPF/st.cmd.motor_as.Vx

->

What I want to do is using autosaveR4-2 to autosave some PVs of motorR6-2-2.Please tell me how to solve the problem!

It will be a great help for me!

李坤

中国科学院上海应用物理研究所

控制组

电话：021－33933238

email：[email protected]

 

 

李坤

中国科学院上海应用物理研究所

控制组

电话：021－33933238

email：[email protected]