Use a scalcout record
Mohan
[Message delivered by NotifyLink]
----------Original Message----------
From: Eric Berryman <[email protected]>
Sent: Tue, November 20, 2007 3:11 PM
To: [email protected]
Subject: Streams questions
Hello!
I've run into a problem I'm guessing others have solved using the
Streams module. I have a device that outputs reads in the format:
U1\r\n+00011-01\r\n
meaning 11e-01 , which would be the preferred format for using a
general format specifier in the protocol file.
What would be the format to successfully read in this number from the
Streams protocol file?
(Or, will I have to run as a string read through a c filter program,
sub record)
Thank you!
Eric
- Navigate by Date:
- Prev:
Streams questions Eric Berryman
- Next:
Re: EPICSデータサーバの件【再確認】 Noboru Yamamoto
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Streams questions (how to read +00011-01 as 11e-01=1.1) Dirk Zimoch
- Next:
Re: EPICSデータサーバの件【再確認】 Noboru Yamamoto
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|