On a related note, if you use the mv2700 and/or mv5100 BSPs and upgrade
your installation to Tornado 2.2.2 (vxWorks 5.5.2), you will have to do
some work fixing up the Level 2 cache support code to get these
particular boards to work properly. You can turn off the L2 cache as a
short-term workaround on the mv5100, but this solution doesn't
completely fix the mv2700.
I can provide more information about what has to be done on request.
Thus Ron and I recommend that you only install the patch to upgrade to
Tornado 2.2.2 if you really need it, either for bug fixes of for the
NFSv3 support.
- Andrew
--
When a distinguished but elderly scientist states that something is
possible, he is almost certainly right. When he states that something
is impossible, he is very probably wrong. -- Arthur C. Clarke
- References:
- Tornado 2.2.2 bug Ron Sluiter
- Navigate by Date:
- Prev:
Tornado 2.2.2 bug Ron Sluiter
- Next:
RE: cmlog ? (still not working) Heinrich du Toit
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Tornado 2.2.2 bug Ron Sluiter
- Next:
Qt edm code John Sinclair
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|