EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: webca compile on win32
From: "Purcell, J. David" <[email protected]>
To: ??? <[email protected]>, [email protected]
Date: Thu, 01 Nov 2007 16:46:54 -0400
BaoChunlei,

There is a static Win32 build (1.1.0) that can be used - one dll.  Matej is working on including it with each release but right now it is available only via a request to Matej or me.  I also have a package that includes a quick install readme, Tom Pelaia's test page, and Matej's documentation that I can send if you'd like.

Dave 



-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of ???
Sent: Wednesday, October 31, 2007 9:01 PM
To: [email protected]
Subject: webca compile on win32

Hi,all
When trying to make WebCA-1.0.0 in vc2005, I get the error:

MakefileInclude:95: *** target pattern contains no `'.  Stop.

Here are the all message:
make -C configure install
make[1]: Entering directory `/cygdrive/e/webca-1.0.0/configure'
perl E:/epics/base-3.14.9/configure/tools/convertRelease.pl -h win32-x86 checkRe
lease
make -C O.win32-x86 -f ../Makefile TOP=../.. T_A=win32-x86 install
make[2]: Entering directory `/cygdrive/e/webca-1.0.0/configure/O.win32-x86'
make[2]: Nothing to be done for `install'.
make[2]: Leaving directory `/cygdrive/e/webca-1.0.0/configure/O.win32-x86'
make[1]: Leaving directory `/cygdrive/e/webca-1.0.0/configure'
make -C npca install
make[1]: Entering directory `/cygdrive/e/webca-1.0.0/npca'
make -C src install
make[2]: Entering directory `/cygdrive/e/webca-1.0.0/npca/src'
make -C O.win32-x86 -f ../Makefile TOP=../../.. T_A=win32-x86 install
make[3]: Entering directory `/cygdrive/e/webca-1.0.0/npca/src/O.win32-x86'
MakefileInclude:95: *** target pattern contains no `'.  Stop.
make[3]: Leaving directory `/cygdrive/e/webca-1.0.0/npca/src/O.win32-x86'
make[2]: *** [install.win32-x86] Error 2
make[2]: Leaving directory `/cygdrive/e/webca-1.0.0/npca/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/cygdrive/e/webca-1.0.0/npca'
make: *** [npca.install] Error 2

Has anyone else had this problem or found a solution?
Thank you for your help,


BaoChunlei
[email protected]
IHEP, Control Group




References:
webca compile on win32 鲍春雷

Navigate by Date:
Prev: RE: question about iocConsole Allison, Stephanie
Next: Re: lexical analyzer for .db? Noboru Yamamoto
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: webca compile on win32 鲍春雷
Next: Configuring Detectors with Different Software Jeffrey Lipton
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Nov 2011 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·