Doesn't the Axis server do some (lossy?) compression?
Pete.
Emmanuel Mayssat wrote:
There is one potential major issue with a video server though.
There is a slight delay between frame acquisition at the camera and
frame acquisition at the computer.
That is with a frame grabber you have real time visualization.
With a video server, you have a delay of .5 sec, up to 1sec.
That delay could become an issue if you *fast* feedback on acquired
frames.
--
Emmanuel
On Wed, 2007-10-10 at 11:42 -0700, Emmanuel Mayssat wrote:
Hello all,
I tried frame grabber, etc. recently decided to move to an AXIS video
--
D. Peter Siddons
Detector Development Group Leader
National Synchrotron Light Source
Brookhaven National Laboratory
Upton, NY 11973
email: [email protected]
Phone: (631) 344-2738
- Replies:
- Re: Frame rate performance Emmanuel Mayssat
- References:
- RE: firewire video on RTEMS-4.6.x-MVME5500 Mark Rivers
- Frame rate performance (was: firewire video on RTEMS-4.6.x-MVME5500) Emmanuel Mayssat
- Re: Frame rate performance (was: firewire video on RTEMS-4.6.x-MVME5500) Emmanuel Mayssat
- Navigate by Date:
- Prev:
Re: ASYN - calling read after interrupt - fix :) Eric Norum
- Next:
Re: Frame rate performance Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Frame rate performance (was: firewire video on RTEMS-4.6.x-MVME5500) Emmanuel Mayssat
- Next:
Re: Frame rate performance Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|