Experimental Physics and
Industrial Control System

Bob Soliday <[email protected]> · Wed, 05 Sep 2007 16:06:40 -0500

Edit extensions/configure/os/CONFIG_SITE.linux-x86.linux-x86. Comment out:
X11_LIB=/usr/lib
X11_INC=/usr/include/X11
MOTIF_LIB=/usr/lib
MOTIF_INC=/usr/include
and uncomment:
#X11_LIB=/usr/X11R6/lib
#X11_INC=/usr/X11R6/include/X11
#MOTIF_LIB=/usr/X11R6/lib
#MOTIF_INC=/usr/X11R6/include
--Bob

Szalata, Zenon M. wrote:

Thanks. Another small problem. Medm expects /usr/lib/libXm.a which on my computer is at /usr/X11R6/lib/libXm.a. What is the best was to specify where the library is located?
Zen 
-----Original Message-----

From: Andrew Johnson [mailto:[email protected]]
Sent: Wednesday, September 05, 2007 12:52 PM

To: Szalata, Zenon M.

Cc: EPICS tech-talk

Subject: Re: EPICS Extensions
Szalata, Zenon M. wrote:
I also tried Configure Files (Old method) with similar unsatisfactory
results. Please, advise.

You need MEDM version 3.1.2.1 to use the R3.14 build files; MEDM 3.1.1 needs the old extensionsConfig area instead; I would definitely recommend getting the newer version of MEDM rather than trying to set up the older extensions area.
- Andrew
--
When a distinguished but elderly scientist states that something is possible, he is almost certainly right.  When he states that something is impossible, he is very probably wrong.  -- Arthur C. Clarke

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System