Experimental Physics and
Industrial Control System

Look at this document:
http://www.aps.anl.gov/epics/modules/soft/asyn/R4-8/tutorial.html

For the string terminator look at 
asynOctetSetInputEos("L0",0,"\n") 
asynOctetSetOutputEos("L0",0,"\n")

Regards,
--
E


On Thu, 2007-07-19 at 21:38 +0800, zhangdemin99 wrote:
> Dear all,
>   I am using ASYN to communicate the GPIB device, and a serial line
> directly attached to the IOC. I want to send a string command to the
> GPIB device, such as "DISPlay:TEXT" ,and the text which I want to send
> is anystring, then how to creat the command array entries when
> creating ? the "eos" is "LF".
>   Many thanks in advance.
>  
> demin zhang
> CAEP
>  
> 
> 
> 
> ______________________________________________________________________
> è è çïå è 3 æ äãè å æ æ è åïå å æ ä ç æ è ä æ
> åï

References:

How to declare the command array? zhangdemin99

Navigate by Date:

Prev: How to declare the command array? zhangdemin99

Next: Re: How to declare the command array? Eric Norum

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: How to declare the command array? zhangdemin99

Next: Re: How to declare the command array? Eric Norum

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024