Experimental Physics and
Industrial Control System

Hi,

Here is a sampled performance of firewire video driver on RTEMS-mvme5500
BPS
running RTEMS4.6.x :
http://www.nsls.bnl.gov/facility/expsys/software/EPICS/FW1024x768x8bit.png

The image was sampled at 30 frames/sec of data transfer and simultaneous
6 Hz
of EPICS GUI real-time display.

Higher performance is yet to be exhibited.

Acknowledgement to Steve Singleton and Mark Heron of Diamond Light
Source at U.K. for sending me the EPICS/GUI/edm  display related
software.

Besides, there is a prebuilt binary of RTEMS-mvme5500 at
http://www.nsls.bnl.gov/facility/expsys/software/EPICS
by clicking at "Download the latest prebuilt binary for MVME5500"

Regards,
Kate

Replies:

Re: firewire video on RTEMS-4.6.x-MVME5500 Kate Feng

Navigate by Date:

Prev: RE: OMS MAXv reset/power-up problem Mark Rivers

Next: Using Groups and hierarchal design in VDCT Dave Reid

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: sequencer installation Emmanuel Mayssat

Next: Re: firewire video on RTEMS-4.6.x-MVME5500 Kate Feng

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024