Experimental Physics and
Industrial Control System

On Tue, 2007-03-27 at 14:10 -0500, Ned D. Arnold wrote:

> A better solution might be to use Channel Access security rules such 
> that writes to GAIN are not allowed when RUNNING.  This stops CA from 
> writing to VAL and EDM should show you that writing is disallowed.

What are you referring to here? The DISP field?
I just remembered that there is a permissive record in the record
manual. What are the typical application for such a record?

--
Emmanuel 

Replies:

Re: DISP and permissive record. Andrew Johnson

Re: DISP and permissive record. Debora Kerstiens

References:

vxWorks, IP-OCTAL-232, interrupt, and reboot John Dobbins

What's wrong if a PV with DISA=1 still processes? Dayle Kotturi

Re: What's wrong if a PV with DISA=1 still processes? Ned D. Arnold

Navigate by Date:

Prev: Re: What's wrong if a PV with DISA=1 still processes? Till Straumann

Next: Re: DISP and permissive record. Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: What's wrong if a PV with DISA=1 still processes? Ned D. Arnold

Next: Re: DISP and permissive record. Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024