Subject: |
What's wrong if a PV with DISA=1 still processes? |
From: |
Dayle Kotturi <[email protected]> |
To: |
EPICS Tech-Talk <[email protected]> |
Date: |
Tue, 27 Mar 2007 11:34:13 -0700 (PDT) |
Hello,
I am using SNL to manage the operational mode of a phase and amplitude ctrllr.
Mode is either CALIBRATING or RUNNING.
When RUNNING, I attempt to disallow changes to gain setting via entry{}
clause of state RUNNING where I set DISA to 1 for the gain PV.
I can see DISA field is set correctly to 1 via dbpr.
On the EDM GUI, however, I am still able to change the gain.
The gain is a longout record.
>From the doc, I understand that when DISA==DISV==1, processing should
not occur. Why does it?
It is EPICS R3.14.8.2.
Dayle Kotturi [email protected]
LINAC Coherent Light Source office 650-926-4923
Stanford Linear Accelerator Center fax 650-926-4778
- Replies:
- Re: What's wrong if a PV with DISA=1 still processes? Andrew Johnson
- Re: What's wrong if a PV with DISA=1 still processes? Ned D. Arnold
- Re: What's wrong if a PV with DISA=1 still processes? Till Straumann
- References:
- vxWorks, IP-OCTAL-232, interrupt, and reboot John Dobbins
- Navigate by Date:
- Prev:
Re: symbDev in 3.14? Andrew Johnson
- Next:
String In and Output records David Dudley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: vxWorks, IP-OCTAL-232, interrupt, and reboot John Dobbins
- Next:
Re: What's wrong if a PV with DISA=1 still processes? Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|