Hi- we rebuilt camonitor with EPICS base patched with Andrew Johnson's
DST fix from last week, to fix this same problem.
Mike
-----Original Message-----
From: Thompson, David H. [mailto:[email protected]]
Sent: Monday, March 12, 2007 2:30 PM
To: [email protected]
Subject: Daylight savings time
Something very weird just happened here and we are still trying to figure
out why.
Running iocs were updated by just setting the TIMEZONE environment variable
and all is fine.
Iocs that were rebooted today had the TIMEZONE variable set in a common
startup script that is called before everything else. Those IOCS seemed
to display the correct time but camonitor was reporting the time an hour
earlier. The hardware timing module displayed the time an hour later than
it was. The timing system was not rebooted and had the correct time on the
hardware link.
We fixed the problem by moving the TIMEZONE setting to the post-startup
script.
Has anyone else had similar problems?
- References:
- Daylight savings time Thompson, David H.
- Navigate by Date:
- Prev:
Daylight savings time Thompson, David H.
- Next:
Re: Daylight savings time Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Daylight savings time Thompson, David H.
- Next:
Re: Daylight savings time Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|