fyi:
i tried this on the epics brick (ebrick) and it works quite nicely. the
ebrick uses
epics 3.14.8.2 on top of vectorlinux v5.1 std.
/david
Ralph Lange wrote:
Jane Richards wrote:
Hi,
Is there an equivalent (or similar) Linux version of the vxStats
driver?
Hello Jane,
have a look at the SLS packages for "IOC Monitoring" (extended
vxStats) and "PC monitoring" (Linux version) on their EPICS software
page at http://epics.web.psi.ch/software/.
These will probably get you as close as you can get.
Cheers,
Ralph
--
+-------------------------------------------------+
David M. Kline [email protected]
Beamline Controls and Data Acquisition (BCDA)
Argonne National Laboratory, Advanced Photon Source
Argonne IL, 60439 630.252.8639
---------------------------------------------
Beamlines R Us
+-------------------------------------------------+
- References:
- caPutLog and Vxstats equivalent for Linux ? Jane Richards
- Re: caPutLog and Vxstats equivalent for Linux ? Ralph Lange
- Navigate by Date:
- Prev:
Re: caPutLog and Vxstats equivalent for Linux ? Ralph Lange
- Next:
RE: Darwin and EPICS_CA_AUTO_ADDR_LIST issue Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: caPutLog and Vxstats equivalent for Linux ? Ralph Lange
- Next:
Easy EPICS Installation for the mortal user Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|