Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: m(o)ca
From: Kay-Uwe Kasemir <kasemirk@ornl.gov>
To: tech talk <tech-talk@aps.anl.gov>
Date: Fri, 15 Dec 2006 15:43:50 -0500
Hello:

Thanks to Eric Norum and Miroslaw Dach,
the Matlab ChannelAccess client 'mca'
now also works with Octave:
Since octave is a little bit cheaper than
Matlab, that might be interesting.
On the other hand, Matlab has nicer Java
integration, so you can actually directly
use JCA/CAJ and no longer need mca...
And then there's Scilab. Too many choices!

If you're still interested in this [m|o]ca update,
you can get it by following the links
from the APS EPICS web page:
Extensions, Clients, MCA, ...
Well, except from right about now until Monday,
when power outages at the SNS will cause the
final web page to be inaccessible.

-Kay
Navigate by Date:
Prev: Re: Problems with database breakpoint routines. Andrew Johnson
Next: USB interface with EPICS Kevin M. Peterson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Parker motor controllers Coles Sibley III
Next: USB interface with EPICS Kevin M. Peterson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·