On Thursday 07 December 2006 16:24, jerome HOSSELET wrote:
> i m a beginner in epics world i try to update a R3.13 version of this
> driver for 3.14.8.2 .
>
> A compilation is looks good but when i launch ioc on VME ppc i have
> this message :
>
> iocInit: driver drvIcv196 not found
> device support devBoIcv296 not found
> device support devMbbiIcv296 not found
> device support devMbboIcv296 not found
versus
> I write in my drvIcv196.c => epicsExportAddress(drvet,drvIcv196);
> and in my devIcv196.c =>
> epicsExportAddress(dset,devBoIcv196);
> epicsExportAddress(dset,devBiIcv196);
> epicsExportAddress(dset,devMbbiIcv196);
> epicsExportAddress(dset,devMbboIcv196);
Note it is Icv196 in the c-file and Icv196 in the dbd. The names must be
exactly the same (including case).
HTH
Ben
--
To the functional programmer's eye a loop is just a degenerate
form of linear recursion written in an adhoc special syntax.
- References:
- -- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Navigate by Date:
- Prev:
Re: SIMM mode for mbbiDirect record Andrew Johnson
- Next:
-- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
-- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Next:
-- Device support and driver for ICV196 R3.14.8.2 -- jerome HOSSELET
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|