Bob,
If you just want to read information from the PLC, you can use the FTP
feature of the Siemens S7 series. No hardware or proprietary software
required.
--
Emmanuel
On Fri, 2006-11-10 at 07:15 -0800, Dalesio, Leo `Bob` wrote:
> Is anyone talking to SIemen's PLCs over Profinet from a PC104?
>
> Or talking to Siemen's PLCs using their ethernet protocol?
>
> Thanks,
> bob
- References:
- Siemen's PLC Interfaces Dalesio, Leo `Bob`
- Navigate by Date:
- Prev:
Re: Siemen's PLC Interfaces Dirk Zimoch
- Next:
Re: Siemen's PLC Interfaces Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Siemen's PLC Interfaces Luedeke Andreas
- Next:
Re: Siemen's PLC Interfaces Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|