EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: MAXv Multi-Axis Motion Controller in use?
From: Jens Eden <[email protected]>
To: [email protected]
Date: Wed, 23 Aug 2006 18:21:20 +0200

Martin,


we have 2 MAXv cards currently running as steppers under VxWorks and
haven't had problems yet. We use Epics 3.14.8.2 / motor-R5-9.

Jens


Martin Heiniger wrote:
Dear all

do you have a "MAXv Multi-Axis Motion Controller"* from Pro-Dex (OMS) in use? What is your experience?

I have seen the 2 entries from Ronald L. Sluiter and Jens Eden in the Tech-Talk archive.

Thanks for any feedback and best regards,
Martin

*) http://www.omsmotion.com/product_detail.php?prodid=8




References:
MAXv Multi-Axis Motion Controller in use? Martin Heiniger

Navigate by Date:
Prev: RE: MAXv Multi-Axis Motion Controller in use? Mark Rivers
Next: Re: VCCT and CA sniffer Chris Payne
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: MAXv Multi-Axis Motion Controller in use? Kurt Goetze
Next: RE: MAXv Multi-Axis Motion Controller in use? Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·