Experimental Physics and Industrial Control System
Subject: |
communication with rs485 multidrop device and command/response protocol |
From: |
[email protected] |
To: |
TECHTALK Tech-Talk <[email protected]> |
Date: |
Wed, 26 Jul 2006 12:06:39 +0500 |
i want to communicate with devices connected in RS485 multidrop and supports standard command/response protocol.to select a device first i have to send ADR xxx command. i have written a driver using asyn,but it can talk with only one device at a time.is there any other driver to support multidrop device with command/response protocol.IPAC is there but it is for canbus or profibus.
****************************************************
TANUSHYAM BHATTACHARJEE
SCIENTIFIC OFFICER
VARIABLE ENERGY CYCLOTRON CENTRE
1/AF BIDHANNAGAR ,SALTLAKE ,KOLKATA-64
email:[email protected]
Phone #23371230/31/32/33/34 Extn: 2304
Fax: 91 33 3346871
****************************************************
- Replies:
- RE: communication with rs485 multidrop device and command/response protocol Mark Rivers
- Navigate by Date:
- Prev:
dol->name Emmanuel Mayssat
- Next:
RE: communication with rs485 multidrop device and command/response protocol Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: dol->name Andrew Johnson
- Next:
RE: communication with rs485 multidrop device and command/response protocol Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024