EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: About building base3.14.7 on winxp
From: "Gan Quan" <[email protected]>
To: [email protected]
Date: Sun, 25 Jun 2006 15:32:43 +0800
Hi, everyone,
I'm installing base3.14.7 on winxp. there are some error like these:
who knows the reason? Thanks!

epicsThread.cpp
..\..\..\src\libCom\osi\epicsThread.cpp(80) : error C2039: 'unexpected' : is 
not
 a member of 'std'
..\..\..\src\libCom\osi\epicsThread.cpp(96) : error C2039: 'unexpected' : is 
not
 a member of 'std'
make[3]: *** [epicsThread.obj] Error 2
make[3]: Leaving directory `D:/Epics/base-3.14.7/src/libCom/O.win32-x86'
make[2]: *** [install.win32-x86] Error 2
make[2]: Leaving directory `D:/Epics/base-3.14.7/src/libCom'
make[1]: *** [libCom.install] Error 2
make[1]: Leaving directory `D:/Epics/base-3.14.7/src'
make: *** [src.install] Error 2

--
Accelerator Physics Group,
Accelerator Research Center
Institute of High Energy Physics (IHEP)
P.O. Box 918-10
Beijing, 100039
P.R. China


Navigate by Date:
Prev: RE: binary serial interface Mark Rivers
Next: About building base3.14.8.2 on winxp Gan Quan
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Driver for SBS IP-OPTOIO-8 Mark Rivers
Next: About building base3.14.8.2 on winxp Gan Quan
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024