EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Scaling a waveform record
From: Steven Hartman <[email protected]>
To: Paul Joireman <[email protected]>
Cc: Tech-Talk <[email protected]>
Date: Mon, 5 Jun 2006 11:04:46 -0400 (EDT)
On Mon, 5 Jun 2006, Paul Joireman wrote:

> values into a waveform record using instrument I/O support, however, I
> would like to scale the raw values to engineering units.  What is the
> best way or a way to do this with a waveform record?

I've used the genSub record for that purpose. I use the waveform record
for the I/O and the genSub for the conversion.

-- 
Steve Hartman
[email protected] || 919-660-2650
Duke Free Electron Laser Laboratory

References:
Scaling a waveform record Paul Joireman

Navigate by Date:
Prev: Scaling a waveform record Paul Joireman
Next: Re: Scaling a waveform record Tim Mooney
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Scaling a waveform record Paul Joireman
Next: Re: Scaling a waveform record Tim Mooney
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·