EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Scaling a waveform record
From: Paul Joireman <[email protected]>
To: Tech-Talk <[email protected]>
Date: Mon, 05 Jun 2006 08:31:03 -0500 
Hello,

I am working with a VME digitizer board that writes its digitized samples to a
block of A32 memory space on the board.  I can read these values into a
waveform record using instrument I/O support, however, I would like to
scale the raw values to engineering units.   What is the best way or a way
to do this with a waveform record?   

Paul

begin:vcard
n:Joireman;Paul
fn:Paul Joireman
tel;fax:(630) 840-2677
tel;work:(630) 840-2550
org:AD;RF/LLRF
adr:;;P. O. Box 500, MS 308;Batavia;IL;60510;USA
version:2.1
email;internet:[email protected]
end:vcard
Replies:
Re: Scaling a waveform record Steven Hartman
Re: Scaling a waveform record Tim Mooney
Navigate by Date:
Prev: RE: Keithley 6485, was: Re: need help Walters, M (Malcolm)
Next: Re: Scaling a waveform record Steven Hartman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Thanks for help Steven Banks
Next: Re: Scaling a waveform record Steven Hartman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024