Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Scaling a waveform record
From: Paul Joireman <joireman@fnal.gov>
To: Tech-Talk <tech-talk@aps.anl.gov>
Date: Mon, 05 Jun 2006 08:31:03 -0500
Hello,

I am working with a VME digitizer board that writes its digitized samples to a
block of A32 memory space on the board.  I can read these values into a
waveform record using instrument I/O support, however, I would like to
scale the raw values to engineering units.   What is the best way or a way
to do this with a waveform record?   

Paul
begin:vcard
n:Joireman;Paul
fn:Paul Joireman
tel;fax:(630) 840-2677
tel;work:(630) 840-2550
org:AD;RF/LLRF
adr:;;P. O. Box 500, MS 308;Batavia;IL;60510;USA
version:2.1
email;internet:joireman@fnal.gov
end:vcard

Replies:
Re: Scaling a waveform record Steven Hartman
Re: Scaling a waveform record Tim Mooney

Navigate by Date:
Prev: RE: Keithley 6485, was: Re: need help Walters, M (Malcolm)
Next: Re: Scaling a waveform record Steven Hartman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Re: Thanks for help Steven Banks
Next: Re: Scaling a waveform record Steven Hartman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·