EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Motor.h file broken for C
From: Doug Murray <[email protected]>
To: Ron Sluiter <[email protected]>
Cc: TechTalk EPICS <[email protected]>
Date: Fri, 02 Jun 2006 10:11:00 -0700
Title: Motor.h file broken for C
Hi Ron, the motor.h include file (we’re using 3.14.8.2) seems to be written for inclusion in C++ files.  Specifically, there are a couple of ‘//’ comments and a missing typedef for an enum.   Can you change this file to accommodate both C and C++?

-doug

--

Doug Murray
Stanford Linear Accelerator Center
LCLS Controls Department
2575 Sand Hill Road
Menlo Park, CA 94025 MS-102
Replies:
Re: Motor.h file broken for C Ronald L. Sluiter
Navigate by Date:
Prev: Re: need help Eric Norum
Next: communications with Keithley 6485, was: Re: need help Maren Purves
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Failed to install mca on WinXP marco_hair
Next: Re: Motor.h file broken for C Ronald L. Sluiter
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024