EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: install Epicsbase3.14.8.2 on WinXP question
From: "Gan Quan" <[email protected]>
To: [email protected]
Date: Thu, 1 Jun 2006 18:05:12 +0800
Succeeded in installing Epicsbase3.14.5 on WinXP,but failed to install 
Epicsbase3.14.8.2 and 3.14.7 on WinXP. Why ? 


D:\Tools\Epics\base-3.14.8.2>make
make -C configure install
make: Interrupt/Exception caught (code = 0xc0000005, addr = 0x41cb2f)
make: *** [configure.install] Error 255

----------------------------------------

D:\Tools\Epics\base-3.14.7>make
make -C configure install
make: Interrupt/Exception caught (code = 0xc0000005, addr = 0x41cb2f)
make: *** [configure.install] Error 255

----------------------------------------


Navigate by Date:
Prev: RE: Building a standalone IOC for an Intel embedded system Darrell Nineham
Next: about mca 黄松
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Python and EPICS Noboru Yamamoto
Next: about mca 黄松
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024