EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Building a standalone IOC for an Intel embedded system
From: David Kline <[email protected]>
To: Jon Brinkmann <[email protected]>
Cc: [email protected]
Date: Tue, 30 May 2006 16:04:18 -0500
hello john,

i'm not quite sure i can help, but i build epics iocs under vector linux and have for fedora core 3 as well. my processor
is a 660mhz pentium iii on a pc104 sold by diamond systems. what's sorts of issues are you having? generally it was
quite simple. i simply downloaded base and synapps from the website. also, i have written an asyn driver for the adc's
on diamond systems athena processor pc104 card. if this is any help, let me know and i can send you the sources.


please advise, thanks in advance,
/david


Jon Brinkmann wrote:
All,

I need to build a standalone IOC on an Intel (AMD Geode LX800) PC104 card
from a Scientific Linux (= RedHat Enterprise) host.  Anyone have a "howto"?

Jon
---
Dr. Jon Brinkmann, Factotum Apache Point Observatory
Network and Systems Administrator 2001 Apache Point Road
Instrument Scientist P.O. Box 59
E-mail: [email protected] Sunspot, NM 88349-0059
URL: http://www.apo.nmsu.edu/brinkmann/ Tel: 505-437-6822


--

+-------------------------------------------------+
David M. Kline                   [email protected]
Beamline Controls and Data Acquisition (BCDA)
Argonne National Laboratory, Advanced Photon Source
Argonne IL, 60439                      630.252.8639
  ---------------------------------------------
                  Beamlines R Us
+-------------------------------------------------+


References:
Building a standalone IOC for an Intel embedded system Jon Brinkmann

Navigate by Date:
Prev: bringing up EPICS 3.14.8.2 on VxWorks for a Xilinx VirtexII FPGA with a PPC405 core Jeff Hill
Next: about building ChannelArchiver for base3.14 Zhao Zhuo
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Building a standalone IOC for an Intel embedded system Jon Brinkmann
Next: RE: Building a standalone IOC for an Intel embedded system Darrell Nineham
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024