EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: R3.14 support for MIPS (hkbaja47)
From: Matt Rippa <[email protected]>
To: [email protected]
Date: Thu, 27 Apr 2006 18:43:21 -1000
Andrew -

The ppc604_long target loads and runs the new munch without exceptions. I can then monitor the test channels from a host. I did not get a 68K board put together, but the symbols did appear to resolve.

I sorted out the "iocClockSyncWithNTPserver:sntpcTimeGet S_sntpcLib_TIMEOUT" issue by setting a proper ntp host via EPICS_TS_NTP_INET.

Still tracking down the FPE on the mips...

thanks,
-Matt

References:
R3.14 support for MIPS (hkbaja47) Matt Rippa
Re: R3.14 support for MIPS (hkbaja47) Andrew Johnson
Re: R3.14 support for MIPS (hkbaja47) Matt Rippa

Navigate by Date:
Prev: caRepeater Al Honey
Next: Compiler error for base R3.14.8.2 on sparc Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: R3.14 support for MIPS (hkbaja47) Matt Rippa
Next: Problem resolving symbols during build. Walters, M (Malcolm)
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024