Experimental Physics and
Industrial Control System

I committed the CONFIG change to our CVS respository so it
wont apply to future seq releases.

Hi Janet- is this for his problem only, or should I add it to the general 2.0.11 release?

Mike


-----Original Message-----
From: Janet Anderson [mailto:[email protected]] Sent: Wednesday, April 19, 2006 11:47 AM
To: Mark Rivers
Cc: [email protected]; [email protected]
Subject: Re: Problems with files in seq-2-0-11/configure

The following fix is needed for seq version 2-0-11 only.

...

References:

RE: Problems with files in seq-2-0-11/configure Laznovsky, Michael

Navigate by Date:

Prev: R3.14.8.2, sequencer, arrays, monitors Kay-Uwe Kasemir

Next: initHooks not registered Geoff Savage

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Problems with files in seq-2-0-11/configure Laznovsky, Michael

Next: Allen Bradely ControlLogix Version Control ? John Dobbins

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024