EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: NewFocus 8752
From: "Maximilien J. Collon" <[email protected]>
To: <[email protected]>
Date: Wed, 12 Apr 2006 13:10:02 +0200 
Hi,

I was wondering if somebody has developed EPICS device support for a
NewFocus Picomotor Ethernet controller 8752? We would like to talk via
tcp/ip and this unit to 6 picomotors, which are attached to it. As an
alternative we could also use RS232 communications with the 8752.

Any help would be greatly appreciated.

Thanks and with kind regards,

Max

--
Maximilien J. COLLON

cosine Research BV :: Tel +31 71 528 49 69
Niels Bohrweg 11   :: Fax +31 71 528 49 63
NL-2333 CA Leiden  :: Web http://cosine.nl
Replies:
Re: NewFocus 8752 Steve Shoaf
Navigate by Date:
Prev: motorRecord and hvel Mark Clift
Next: Re: NewFocus 8752 Steve Shoaf
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: motorRecord and hvel Mark Clift
Next: Re: NewFocus 8752 Steve Shoaf
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024