Antonino Miceli wrote:
Hi,
I am trying to control (via channel access) a detector/IOC using the IDL
MCA GUI. For reasons beyond my control, I cannot get this client to
install properly on a computer which lives on the same side of the
firewall as the detector lives.
However, I can run the IDL MCA client on a different subnet (and on the
other side of the firewall). [For those at APS, I want to run the client
on oxygen (52 subnet), but my detector and it's IOC are behind a CAT
firewall (namely 248 subnet).]
So, it possible for an EPICS client to talk to EPICS server through a
firewall?
Yes, but you have to get a network administrator to poke some holes
in the firewall. By default, EPICS uses ports 5064 and 5065 for normal
CA traffic.
--
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.
- Replies:
- RE: IDL MCA and CA through firewalls?? Jeff Hill
- References:
- IDL MCA and CA through firewalls?? Antonino Miceli
- Navigate by Date:
- Prev:
IDL MCA and CA through firewalls?? Antonino Miceli
- Next:
RE: IDL MCA and CA through firewalls?? Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
IDL MCA and CA through firewalls?? Antonino Miceli
- Next:
RE: IDL MCA and CA through firewalls?? Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|