John Dobbins wrote:
Dear All,
I want to create the following application in EPICS. I have a sixteen
channel industry pack ADC that I will be using in a VME crate with an
MVME162. EPICS version 3.13.10. I want to read the ADC at ~ 1.4 kHz and
record waveforms lasting 5 to 10 seconds. As this is faster then I can
imagine record processing taking place I assume I need to create device
support that creates a task which runs at 1.4 kHz, maintains data
buffers and periodically lets a waveform record (?) know that more data
is available (I'd like to be able to see some of the data before the
total acquisition is complete.)
Does anyone have code for something resembling this that I could look at?
Mark Rivers wrote support for the IP330 IndustryPack ADC that will do this.
See the ip330 module web page:
http://cars9.uchicago.edu/software/epics/ip330.html
--
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.
- References:
- Looking for Application Example John Dobbins
- Navigate by Date:
- Prev:
Looking for Application Example John Dobbins
- Next:
RE: Looking for Application Example Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Looking for Application Example John Dobbins
- Next:
Re: Looking for Application Example Steven Hunt
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|