Experimental Physics and Industrial Control System
Hi Stefan,
On Fri, 27 Jan 2006, Tim Mooney wrote:
>
> Do you have any examples to work from? If not, I could send you an example
> of the genSub record doing some simple array stuff. I have only one example
> of a waveform record writing to hardware, and it's probably not a good example
> for your application, because the hardware is complicated and obtuse.
>
Along the lines of what Tim said, when you download the genSub record,
you will find a simple example database and code showing how to pass
arrays between two genSub records.
Hope this helps!
Cheers,
Andy
--------------------------------------------------------------------
Observatory Sciences Limited Email: [email protected]
William James House Tel: 44 - (0)1223 - 508259
Cowley Road Fax: 44 - (0)1223 - 508258
Cambridge, CB4 0WX, UK http://www.observatorysciences.co.uk
- References:
- Re: use of SUB record Tim Mooney
- Navigate by Date:
- Prev:
EPICS Meeting Date is in Flux - please hold Dalesio, Leo `Bob`
- Next:
control systems and relational databases Claude Saunders
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: use of SUB record Tim Mooney
- Next:
RE: use of SUB record Bruins, Stefan
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024