1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Using AAI records under EPICS |
From: | Tim Mooney <[email protected]> |
To: | "Bruins, Stefan" <[email protected]> |
Cc: | "'[email protected]'" <[email protected]> |
Date: | Wed, 25 Jan 2006 10:14:47 -0600 |
On Wed, 25 Jan 2006, Bruins, Stefan wrote:
For an application I need to upload a large number of analogue values to a device. Therefore the AAI record seems to suit perfect. I use EPICS R3.14.6 on a linux machine.
Stefan--
The device support aspect of your question has already been answered, but I do have one additional point to add. Search the tech-talk archives for aai and aao. There were a number of posts a few years back regarding some problems with these records which I don't believe were all addressed. I decided to use waveform records for this purpose instead of aai/aao after reading these.
Me too. I don't see any device support for this record in EPICS base, and I didn't find any by searching on the APS web site. I did find a message from long ago about use of the record at CEBAF (now JLAB). There is at least soft device support for the waveform record in base.
-- Tim Mooney ([email protected]) (630)252-5417 Beamline Controls & Data Acquisition Group Advanced Photon Source, Argonne National Lab