For an application I need to upload a large number of analogue values to a
device. Therefore the AAI record seems to suit perfect.
I use EPICS R3.14.6 on a linux machine.
As being not such an experienced user it is not clear for me how to add the
support for this record to my application.
I've already added the line:
DCCC_DBD += aaiRecord.dbd
After the "DCCC_DBD += base.dbd" line in the "DCCCApp/src/Makefile" file.
When running the application I get the following message from the IOC
console:
filename="../recGbl.c" line number=88
Missing device support entry table PV: DCCC:wavgen:waveform aai:
init_record
What actions do I have to take to get the support for this record type
running?
Thanks in advance,
Stefan
- Replies:
- Re: Using AAI records under EPICS Kay-Uwe Kasemir
- Re: Using AAI records under EPICS Ralph Lange
- Re: Using AAI records under EPICS Steven Hartman
- Navigate by Date:
- Prev:
Re: Automated ELOG entries from IOC Noboru Yamamoto
- Next:
Re: Using AAI records under EPICS Kay-Uwe Kasemir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
FW: R3.13.10 ca_event problem Jeff Hill
- Next:
Re: Using AAI records under EPICS Kay-Uwe Kasemir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|