EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Cost effective solution for monitoring a large number of temperatures
From: "Darrell Nineham" <[email protected]>
To: <[email protected]>
Date: Fri, 20 Jan 2006 10:42:59 -0000
Reference Temperature Monitoring with PT-100s

Here at Hytec we do an IP Card (the 8403) which can be coupled with
8913P Din Rail Breakout Box, this gives you 14 PT-100s for about 1200
euros (85 per channel).  By changing the 8913P to 8913T the IP Card can
use thermocouples instead.

A possible solution for anyone after a VME / IP Carrier Solution.

EPICS drivers and software support provided free.

Darrell Nineham
Hytec Electronics Ltd.
Tel: +44 (0) 118 975 7770
Fax: +44 (0) 118 975 7566
Web: www.hytec-electronics.co.uk
 
++++++++++++++++++++++++++++++++++++++++++++
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error, please notify the
sender immediately. The views expressed in the message are those of the
individual author and may not necessarily represent the views of Hytec
Electronics Ltd.


-----Original Message-----
From: Bernhard Kuner [mailto:[email protected]] 
Sent: 20 January 2006 09:31
To: Josh Stein; [email protected]
Subject: Re: Cost effective solution for monitoring a large number of
temperatures


Here with BESSY we ar going to install an version of our ADA-Card that 
offers in the VME-Bus version 32 temperature channels for PT100 sensors.

This Card is delivered by EuKontrol and is about 2500 EUR, that means 78

EUR/channel. We use here the 3HE-Version with 16 channels per card and 
controlled via our embedded controler and the CAN-Bus. There is device 
support for EPICS available. A good feature is that this card uses the 
same long time stable integrating AD converter as all our ADA-Cards and 
so it is best suited in noisy environment with long cables to the 
sensor. I want to mention it because we had some trouble with that
before.

Regards

Bernhard Kuner



References:
Re: Cost effective solution for monitoring a large number of temperatures Bernhard Kuner

Navigate by Date:
Prev: Re: Cost effective solution for monitoring a large number of temperatures Bernhard Kuner
Next: synApps workshop part 2 - 20-23 February Rees, NP (Nick)
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Cost effective solution for monitoring a large number of temperatures Bernhard Kuner
Next: RE: Cost effective solution for monitoring a large number of temperatures Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024