EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: vxstats for Epics 3.13.8
From: Benjamin Franksen <[email protected]>
To: [email protected]
Date: Tue, 17 Jan 2006 11:23:59 +0100
On Monday 16 January 2006 23:54, Benjamin Franksen wrote:
> On Monday 16 January 2006 20:17, Andrew Johnson wrote:
> > liushu wrote:
> > >    I need vxStats for Epics3.13.8.Where can I get it?
> >
> > Are you aware that there is a version of vxStats already included
> > in Base R3.13.8?  It was unbundled for the R3.14.x series, but is
> > usable in the earlier versions as is.
>
> Note that this version of vxStats calls memPartInfoGet() which is
> well known to (at least in VxWorks 5.2 and 5.4.3 (tornado 2.0.2))
                                             ^^^^^
Sorry, I meant to say 5.4.2.

Ben

References:
vxstats for Epics 3.13.8 liushu
Re: vxstats for Epics 3.13.8 Andrew Johnson
Re: vxstats for Epics 3.13.8 Benjamin Franksen

Navigate by Date:
Prev: Re: vxstats for Epics 3.13.8 Benjamin Franksen
Next: Re: vxstats for Epics 3.13.8 Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: vxstats for Epics 3.13.8 Benjamin Franksen
Next: Re: vxstats for Epics 3.13.8 Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024