EPICS Variable scan rate

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Variable scan rate
From:	Emmanuel Mayssat <[email protected]>
To:	John Faucett <[email protected]>
Cc:	[email protected]
Date:	Thu, 05 Jan 2006 08:44:31 -0800

Hello ,

I would like to have a scan rate that works as follow:
( example: for temperature readback record)

The record starts in passive mode
When I change the temperature settings, the record should have a high
scan rate.
When the readback stabilizes, the scan rate should decrease and after
some amout of time go back to passive.

Did anybody implement this type of scan ?
If so how?

Thanks,

-- 
Emmanuel Mayssat
Cell: 650/793-0626
Lyncean Technologies, Inc.
"See the invisible"

Replies:: Re: Variable scan rate Steven Hartman

References:: Building JCA1 John Faucett

Navigate by Date:: Prev: Building JCA1 John Faucett; Next: RE: Variable scan rate Dalesio, Leo `Bob`; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Building JCA1 John Faucett; Next: Re: Variable scan rate Steven Hartman; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024