Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Variable scan rate
From: Emmanuel Mayssat <emmanuel_mayssat@lynceantech.com>
To: John Faucett <faucett@lanl.gov>
Cc: tech-talk@aps.anl.gov
Date: Thu, 05 Jan 2006 08:44:31 -0800
Hello ,

I would like to have a scan rate that works as follow:
( example: for temperature readback record)

The record starts in passive mode
When I change the temperature settings, the record should have a high
scan rate.
When the readback stabilizes, the scan rate should decrease and after
some amout of time go back to passive.

Did anybody implement this type of scan ?
If so how?

Thanks,

-- 
Emmanuel Mayssat
Cell: 650/793-0626
Lyncean Technologies, Inc.
"See the invisible"


Replies:
Re: Variable scan rate Steven Hartman
References:
Building JCA1 John Faucett

Navigate by Date:
Prev: Building JCA1 John Faucett
Next: RE: Variable scan rate Dalesio, Leo `Bob`
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Building JCA1 John Faucett
Next: Re: Variable scan rate Steven Hartman
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·