Experimental Physics and
Industrial Control System

John Dobbins <[email protected]> · Wed, 16 Nov 2005 16:02:58 -0500

Dear All,
I am trying to build EPICS (3.14.7) for RTEMS-uC5282 on host linux-x86.
I get the following build error. Any advice welcome.
John Dobbins

/mnt/disk1/rtems-4.7/bin/m68k-rtems4.7-g++
-B/mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/ -specs bsp_specs
-qrtems -o softIoc -static -L../../../lib/RTEMS-uC5282/ -m528x
-u Init /mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/no-dpmem.rel
/mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/no-mp.rel
/mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/no-part.rel
/mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/no-signal.rel
/mnt/disk1/rtems-4.7/m68k-rtems4.7/uC5282/lib/no-rtmon.rel -m5200
softIoc_registerRecordDeviceDriver.o softMain.o -lrecIoc
-lsoftDevIoc -liocsh -lmiscIoc -lrsrvIoc -ldbtoolsIoc -lasIoc -ldbIoc
-lregistryIoc -ldbStaticIoc -lca -lCom -lm -lrtemsCom -lrtemscpu
-lCom -lrtemsNfs -lm

../../../lib/RTEMS-uC5282//librtemsCom.a(rtems_config.o):(.data+0x94):
undefined reference to `rtc_initialize'

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System