Experimental Physics and
Industrial Control System

Hello,

I'm testing the event generator EVG200, but my IOC failed to probing the 
event-generator board. Could somebody give me some suggestions? Thank you 
very much. 
---------------------------------------------------------
EgConfigure(4,0x2000)
value = -1 = 0xffffffff = prsrv_cast_client + 0xff0f7b3f
ErConfigure(6,0x1800,164,5) 
value = -1 = 0xffffffff = prsrv_cast_client + 0xff0f7b3f

cd "/home21/home/leige/epicsApp/dbd"
value = 0 = 0x0
dbLoadDatabase("baseApp.dbd")
devApsEg: Failure probing for event generator... Card disabled
devApsEr: Failure probing for event receiver... Card disabled
value = 0 = 0x0
dbLoadDatabase("evgevr.dbd")
value = 0 = 0x0

----------------------------------------------------------------
Best wishes,

Ge

Replies:

Re: Failure probing for event generator Dayle Kotturi

References:

Re: TRAPWRITE and logging CA_PUT activity Albert Kagarmanov

Navigate by Date:

Prev: Error using Agilent E5810A LAN/GPIB Gateway Mark Wagner

Next: Re: Error using Agilent E5810A LAN/GPIB Gateway Benjamin Franksen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: TRAPWRITE and logging CA_PUT activity Albert Kagarmanov

Next: Re: Failure probing for event generator Dayle Kotturi

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024