Experimental Physics and
Industrial Control System

"Ernest L. Williams Jr." <[email protected]> · Thu, 01 Sep 2005 18:19:59 -0400

On Thu, 2005-09-01 at 15:07 -0700, Laznovsky, Michael wrote:
> Hi all- we're trying to build a modified version of the SNC (state program compiler) 
> for local 3.14.6 development, and my attempts at making it use the test copy are falling short. 
> 
> I've tried telling configure/RELEASE where the test compiler is via:
> 
> 	#If using the sequencer, point SNCSEQ at its top directory:
> 	SNCSEQ=/u/cd/xyz/work/seq-2.0.10
> 
> ... but the build fails with:
> 
> 	gmake[1]: Entering directory `/u/cd/xyz/tmp-xyz/ioc/configure'
> 	perl <SLACstuff>/epics/R3.14.6/base/configure/tools/convertRelease.pl -h solaris-sparc checkRelease
> 
> 	Definition of SNCSEQ conflicts with SNCSEQ support.
> 	In this application configure/RELEASE defines
> 	        SNCSEQ = /u/cd/xyz/work/seq-2.0.10
> 	but SNCSEQ at  has
> 	        SNCSEQ = <SLACstuff>/epics/R3.14.6/site

Check your RELEASE file in "/u/cd/xyz/work/seq-2.0.10/<...>/configure"
Looks like you have SNCSEQ defined there.

> 
> 	gmake[1]: *** [checkRelease] Error 1
> 
> I don't see where the second definition in the error comes from.  It's not 
> anywhere in the installed EPICS area that I can find.
> 
> thanks, 
> Mike

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System