Hi Denison,
we are using a TMZ104+ (www.tri-m.com) with 128MB RAM
and 48MB of DiskOnChip. The CPU is a Transmeta Crusoe 5500.
Our applications uses the RS232c ports and the Ethernet port
(by a Fabiatech Ethernet Card - FB1603B).
About our experience with this kind of PC104 may you have a look here:
http://www.aps.anl.gov/epics/wiki/index.php/HowToPC104
Hope this helps.
Mauro Giacchini.
INFN-LNL
ITALY.
Denison, PN (Peter) wrote:
Does anyone have any recommendations for or against any particular PC104
format single-board computer for use as a Linux IOC?
We are considering the Arcom boards (Viper, Vulcan) which run a
400/533MHz Intel XScale processor, and come with a Linux SDK. Is 64MB
RAM and 16MB flash likely to be enough to run EPICS?
Peter Denison, Senior Software Engineer
Diamond Light Source Ltd., Diamond House, Chilton, Didcot, Oxon, OX11
0DE
Tel: +44 1235 778511
- References:
- Suitable PC104 board for EPICS/Linux Denison, PN (Peter)
- Navigate by Date:
- Prev:
Re: Suitable PC104 board for EPICS/Linux Motoki Ooi
- Next:
Mariner and Aurora CPU modules and CAMAC serial highway driver Evgeniy Tikhomolov
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Suitable PC104 board for EPICS/Linux Motoki Ooi
- Next:
Re: Suitable PC104 board for EPICS/Linux Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|