Experimental Physics and
Industrial Control System

Korhonen Timo <[email protected]> · Thu, 18 Aug 2005 09:08:13 +0200

Hi Erik,
we at PSI/SLS have bought a couple of mvme6100's, but are not yet using
them to run EPICS. At the moment we are using mvme5110's and a lot of
mvme230x, but need to find a substitute.

I was a bit concerned about how hot the CPU gets. One must always take
care of good cooling (close open slots and so on.) We have many places
(outside SLS hall) that are not airconditioned and this concern has held
us back.

I would be interested to hear about the experiences of other people.
best regards,
Timo

Erik Johansson wrote:

Is anyone using an MVME 6100 as an EPICS IOC?
One of our new systems is using an MVME 6100 as a host CPU and it would be
nice to have that be the EPICS IOC for the system as well.
Thanks,
Erik
****************************************
Erik M. Johansson
Adaptive Optics Software Engineer
W. M. Keck Observatory
65-1120 Mamalahoa Hwy
Kamuela, HI 96743
Tel: 808-885-7887
Fax: 808-885-4464

--
Timo Korhonen  PSI (Paul Scherrer Institut)
               CH-5232 Villigen PSI
               tel + 41- 56 3103262  fax + 41 - 56 310 3383
e-mail:	       [email protected]

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System