Hi,
I am trying to use Ca Put Logging facility on
Windows IOC (epics base 3.14.7) but don't see anything in output log
file.
My ASF is the following:
UAG(CTLGRP) {d0ctl,sirotenk} HAG(CTLGRP)
{d0ol75.fnal.gov,d0ollpt07.fnal.gov}
ASG(DEFAULT) {
RULE(1,READ) RULE(1,WRITE,TRAPWRITE)
{ UAG(CTLGRP) HAG(CTLGRP)
} }
At IOC side I set the following:
set EPICS_IOC_CA_PUT_LOG_INET=131.225.227.47 set
EPICS_IOC_LOG_INET=131.225.227.47 set EPICS_IOC_CA_PUT_LOG_PORT=7010 set
EPICS_IOC_LOG_PORT=6500
and run two iocLogServers as recommended with the following sets:
set EPICS_IOC_LOG_FILE_NAME=./log_server.txt set
EPICS_IOC_LOG_PORT=6500 set
EPICS_IOC_LOG_FILE_LIMIT=1000000 and
set
EPICS_IOC_LOG_FILE_NAME=./log_server_ca_put.txt set
EPICS_IOC_LOG_PORT=7010 set EPICS_IOC_LOG_FILE_LIMIT=1000000
I see some init messages in log_server.txt file, so
logging itself works. But file log_server_ca_put.txt remains empty after I made
several
CA puts to the IOC. When I listen port 7010 directly, there are no packets arriving to
that port
What I am doing wrong?
Thanks,
Vladimir
|