Hi,
There are two network interfaces (N.I.) on my IOC, each attached
to a different IP address. I thought one could decide which medm
clients "Channel Accessing" which N.I. by opening two windows.
Both windows are set with EPICS_CA_AUTO_ADDR_LIST = NO.
Window #1 is set with EPICS_CA_ADDR_LIST= IP1, while
window #2 is set with EPICS_CA_ADDR_LIST= IP2.
Is ther any other better way ? I wanted to make sure that certain
clients CA the specified IP, instead of the other one. Thus, I
disconnected
one of the cable going to that specified N.I. However, when I do that,
all the medm clients on both windows became disconnected from the IOC.
Any pointer highly appreciated,
Kate
- Replies:
- Re: CA for IOCs w/ dual NICs Ernest L. Williams Jr.
- Re: CA for IOCs w/ dual NICs Andrew Johnson
- RE: CA for IOCs w/ dual NICs Jeff Hill
- Navigate by Date:
- Prev:
Job opening: APS Beamline Controls group leader Tim Mooney
- Next:
Re: CA for IOCs w/ dual NICs Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Job opening: APS Beamline Controls group leader Tim Mooney
- Next:
Re: CA for IOCs w/ dual NICs Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|