Tom,
I added a GDCT to VDCT converter in the latest version of GDCT. This
was done over a year ago. It is available from the EPICS documentation page
http://www.aps.anl.gov/epics/extensions/gdct/index.php. The GDCT-1-3-1
version differs in the Makefile.Host from GDCT-1-3-0 and has changes needed
to build with later versions of EPICS base. There is a link to Interviews
on that page. It builds for us, so if what is available on the web site is
not sufficient, let us know.
I only tested it on Solaris, and it was only done as an aid to
converting to VDCT. GDCT itself is not really supported and will not be
updated.
The converter is described in the manual on the web page. It works
reasonably well and has been used a fair amount here. Nick Dimonte
([email protected]) is the person most familiar with using it. I don't use it
and have pretty much forgotten what I did. (Early Alzheimer's ;-)
-Ken
- Navigate by Date:
- Prev:
building libraries from only objs and libs in 3.14 Benjamin Franksen
- Next:
synApps 5.1 release Tim Mooney
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: gdct Paul Sichta
- Next:
building libraries from only objs and libs in 3.14 Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|