Experimental Physics and
Industrial Control System

Hi- these are still broken (and may well be the same doc?):

http://www.aps.anl.gov/epics/modules/soft/asyn/R4-2/gpibCoreConversion/conversionNotes.html

http://www.aps.anl.gov/epics/modules/soft/asyn/R4-1/gpibCoreConversion/conversionNotes.html

http://www.aps.anl.gov/epics/modules/soft/asyn/R3-3/gpibCoreConversion/conversionNotes.html

http://www.aps.anl.gov/epics/modules/soft/asyn/R3-2/gpibCoreConversion/conversionNotes.html

May I suggest also that it be written thusly... less confusing:

	static long init_ai (int pass)
	{
	    if (pass == 0) {

This was a rather annoying bug to chase, and I don't want anyone else to have to go through that!  :))

Mike


-----Original Message-----

> in the sample code for "init_ai()", the line:
>
> 	 if (parm) {
>
> should be:
>
> 	 if (parm == 0) {

Fixed.
Thanks.

Navigate by Date:

Prev: RE: The later four ports of IP-Octal-232 could not work. Mark Rivers

Next: Logarithmic conversion / Breakpoint tabes Gavin Smith

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: 3.14.6/asyn/vxi11 crash -- SOLVED Laznovsky, Michael

Next: The later four ports of IP-Octal-232 could not work. ligang

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024