Experimental Physics and
Industrial Control System

"Graham S Cross" <[email protected]> · Wed, 9 Mar 2005 12:17:05 -0000

Hi Paul,
Hytec have a PCI version of the VME2992 CAMAC serial highway driver which
has the same hardware register interface, the Hytec 5992. It will be easy to
convert the EPICS driver for this card.
We also have a 10/100 Ethernet connected CAMAC controller with a host
ESONE/DOE subroutine interface. An EPICS driver for should be a simple
modification to the VSD2992 driver.
Graham S Cross
Hytec Electronics Ltd.
Tel: +44 (0) 118 975 7770
Fax: +44 (0) 118 975 7566
Mobile: 0795 781 3862
Web: www.hytec-electronics.co.uk

++++++++++++++++++++++++++++++++++++++++++++
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error, please notify the sender
immediately. The views expressed in the message are those of the individual
author and may not necessarily represent the views of Hytec Electronics Ltd.

>-----Original Message-----
>From: Paul Sichta [mailto:[email protected]]
>Sent: 08 March 2005 19:47
>To: [email protected]
>Subject: PCI CAMAC Highway Driver?
>
>We are currently driving CAMAC serial highways using the
>Hytec VSD-2992 VME module on a vxWorks IOC, with
>Rivers/Tang/Bjorkland rec/dev/drv software.  I'd like to
>replace that with a PCI highway driver on a Linux or RTEMS
>IOC.  Has anyone also done this?
>
>--
>Paul Sichta
>Princeton Plasma Physics Laboratory
>609-243-3477       FAX 3030

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System